Bead Wire Grommet Machine AW-BG-1A-16-5 x 3

AW-BG-1A-16-5 x 3 for making 3 pcs bead wire rings at the same time and with stocker.

1. Fully-Auto type bead wire winding maching with auto ejector, stretch roll, rubber extruder, Pre-heating stand, wire guide & reel stand.
2. There are special design and with patent "Auto pressing the joint position of bead wire".
   So the bead wire overlape joint position will be sticked together properly while push out from winding former and no need to wrap the cloth on joint position.
3. Bead wire building stand (Auto type) drived by AC servo motor. This is fully automatic process.
   Include Auto feeding -->Auto counting the turns -->Auto pushing out beadwire from former.
4. Tension device control by aire cylinder to prevent bead wire loose and out of guide roller while former stop running for cutting wire.
5. From item NO.8~No.15 can be 2 pcs or 3 pcs bead wire rings winding at the same time. (There is a slitting cutter for separate bead wire to 2 pcs or 3 pcs of bead wire rings).
6. Automatic temperature controller by oil medium is available for option by extra charge for extruder.
7. Special design of motorise bead wire size change device is available for option by extra charge.
   When change the bead wire former, the position of bead wire pressing device & bead wire feeding device has to be changed. The traditional design is changed by hand wheel. We have to loosen the fixing bolt then adjust the hand wheel then fix bolt angain .
   It takes about 30 minutes.
   We have a new design, the hand wheel changed to gear motor and the fixing bolt changed to slide bearing. So the size change will be very easy. It takes about one minute only.